The test of the e-cigarette Eleaf iStick TC 40 W

Smoking cessation: our test of the e-cigarette Eleaf iStick TC 40 W

With the iStick TC40w, Eleaf has joined the ranks of manufacturers offering temperature control on their devices to help smokers succeed in the challenge of smoking cessation through the electronic cigarette. The marketing of this model brings to 8 the number of Mods in the iStick range. In our humble opinion, Eleaf missed the opportunity to launch a whole new product line by placing its new temperature control models under a different label than the iStick. But that’s just us, obviously !

L’iStick TC 40 W looks like the rest of the iStick range. This mode is almost identical to the’original 20 watt iStick (except for the presence of the temperature control option). Here is the full test of the device !

Eleaf iStick TC 40 W: the main technical features

L’Eleaf iStick TC 40 W is a compact box with an internal battery of 2,600 mAh. It comes with a micro USB charging cable and, thanks to its pass-through charging capability, you can continue vaping while the device is charging. However, unless you have a computer, you will not be able to control the temperature’If you don’t already own or buy a 1 A wall adapter, you will need to charge the power supply’iStick via computer.

The micro USB port is located at the bottom of the’device.

With the’With the addition of temperature control, this iStick has “given up” the variable voltage (although it is not a “standard” voltage)’It is variable in power, with a range of 1 to 40 watts in 0.1 watt increments). The temperature range is 100 ° – 315 ° C in increments of 10 °. In variable power mode, it lights standard coils with a resistance between 0.15 and 3.5 ohms. L’iStick TC40W allows you to’supply Ni200 coils from 0.05 to 1.0 ohm in temperature control mode.

In addition, this model is equipped with’a spring loaded 510 connector.

L’The iStick TC40W is equipped with four buttons, all located on the front of the unit’The front of the’To do this, you must simultaneously hold down the device button. At the top is the round firing button. Below the’On the OLED screen there are two arrow-shaped buttons, the up button and the down button’In this area you can find the increase button (upwards) and the decrease button (downwards).

The oval-shaped menu button is located between these two. You can activate or deactivate the mod by pressing the “Fire” button five times.

How the model works

To switch from variable power mode to temperature control mode, hold down the menu button for two seconds. To change the output in the chosen mode, use the “up” or “down” buttons. A simple press of these buttons changes the power in 0.1 watt increments or the temperature in 10° increments. Holding down these buttons will speed up the pace of change.

Eleaf suggests that you lock the base resistance of the device’A Ni200 coil is used when you first attach it to the iStick’iStick TC 40 W. To do this, you must hold down the menu button simultaneously’ignition and temperature rise button. You’ll know you’ve locked the base resistor when the “Ω” symbol is replaced by a lock symbol next to the’displaying resistance.

L’OLED display of the device shows the battery level and the resistance of the connected coil. In temperature control mode, it displays the power under the heater and the temperature you have selected in the room’far right. It says “F” or “C” depending on the platform’where you are.

To switch from Fahrenheit to Celsius, you have to scroll up or down the’one to get to the’other. In variable power mode, the’The display shows the volts under the resistor and the power selected at the time of installation’extreme right-wing.

L’The OLED screen has a’a stealth mode (no screen lighting) that is activated and deactivated by pressing the “Fire” and “Down” buttons simultaneously. You can lock the’iStick TC 40 W that disables power and temperature changes by pressing the up and down buttons simultaneously. Finally, the’iStick TC 40 W allows you to’reverse the’orientation of the’180° OLED display. When the Mod is disabled, hold down the up and down buttons at the same time.

Eleaf offers the’iStick TC 40 W in four colors, gray, blue, black and silver.